JH-101G Welding Flux

JH-101G is used for special agglomerated flux for buried arc of X60--X70 grade pipes materials. The basicity is about 1.8, white round particles, and the grain size is 2.0--0.4mm (10-45 mesh). It can be used for both AC and DC, and the welding wire is connected to the positive pole in DC. The arc combustion is stable, slag removal is easy, and the weld seam is beautifully formed. The weld seam has high impact toughness at low temperature. Due to the special production process, the flux has good moisture resistance, and the loose specific gravity of flux is small. In the welding process, the flux consumption is small.

Combining with appropriate wires, it can weld a variety of pipe steels, such as X52, X60, X65, X70, etc., and can also be applied to multi-layer welding, double-sided single pass welding, multi-wire welding and narrow gap submerged arc welding.